REVERSE-FOLD SYSTEMS (Shown upper level at left) Reverse-Fold systems are designed for applications where space behind the bleacher stack is desired for other activities when the bleacher is not in use. This is common in areas such as mezzanines or balconies. Up to 18 rows can be specified with this system (over 18 rows, consult factory).
	FORWARD-FOLD SYSTEMS (shown lower level at left) This is the most typical application of telescopic seating in which the bleachers open in the forward direction. They are available up to 24 rows (over 24 rows, consult factory) and utilize either wall attachment or free-standing floor attachment.
	RECESSED SYSTEMS This system requires minimal clearance to fit conveniently under a balcony overhang and maximizes usable floor space when the bleachers are stacked. Available with any of the Interkal seating options up to 24 rows (over 24 rows, consult factory). Add one of our automatic power options for easy operation.
	MOBILE SYSTEMS Mobile systems consist of single sections of bleachers which can be used in one part of a building and stored in another. They offer increased flexibility and are available with any seating option up to 14 rows at 10-1/4" rise and 12 rows at 11-1/2" rise. (over 14 rows, consult factory). Portable or self-contained hydraulic dollies are provided for transport to various spectator or storage areas.
	Free Standing Floor Attached For applications where bleachers are required to be located away from walls or when construction prohibits attachment. (Show here with back rails and back panels)

• Truncated sections / notchouts to comply with the Americans with Disabilities Act (ADA) requirement for wheelchair seating.
• Elevated front and rear walkways and cross aisles as required for code compliance, as well as improved sightlines.
• Cut-outs for columns that extend out from rear wall
• Pie-shaped sections for radiused configurations.

BACK RAILS PANELS required on mobile and reverse-fold units to provide added safety and close off access to the understructure. Both end and back panels are constructed of 15/32" AC grade plywood supported by a steel frame. Panels are finished in gray polyethylene laminated plywood to complement the seating surface and are trimmed with aluminum edging.