Select Bollard Type:  
B2.a - Self Righting Bollard
To provide emergency access and resist damage. The Self-Righting Bollards have been developed to take a nudge from a vehicle and can be displaced up to about 45° without damage to the bollard. Should they be nudged more than 45° then a link inside will snap and the Bollard will fall flat on the ground but be retained in the general area by a chain. Later the snappable link can be replaced and the bollard returned to its upright position.

  • Polished 304 Stainless Steel construction with reflective ring. Grade 316 available on request
  • Can be pushed over to about 45° by vehicles only and will automatically return to upright position.· When pushed beyond 45°
  • (e.g. by a Fire Engine for access) a shear pin will break allowing the bollard to drop to the ground.· When dropped, the bollard will remain secured by a chain.
  • A new low-cost shear pin and a few minutes of labour will restore the bollard.